-
발광성 128S64AA2G가 조정가능한 VFD 전시 단위에 의하여, 진공 전시 128x64 점을 찍습니다
VFD Graphic Display module 128x64 dots 128S64AA2G Features: The input voltage for display is a single 5VDC. Compact and light-weight unit by using flat packed display drivers and one-chip VFD controller. Serial and 8-bit parallel interface available. Flash RAM for Font reserved for ASCII GB2312 KSC5601 and Shift JIS font table. Luminance adjustment available by software. Application: Measuring equipment display, test equipment display, instrument display Information boards in
-
96L08AA5 문자 표시 단위, 도표 VFD 전시 직렬 인터페이스가 96x8에 의하여 점을 찍습니다
VFD Graphic Display module 96x8 dots 96L08AA5 Features: Display: Vacuum Fluorescent Display (High Quality and Readable Display) Since a DC/DC converter is used, only +12Vdc power source is required to use the module. Interface: 2-wired Synchronous Serial Interface (SDA, CLK for Signal Interfacing and RST for Initialization) CG-ROM Font: 128 Characters of ASCII (5 * 7 Dot Matrix) CG-RAM Font (User Definable Font): 16 Kinds Available Brightness Level: 8 Levels (from 8% to 100%)
-
700 다 색깔 다양성이 CD 발광성 VFD 그래픽 표시 단위에 의하여 256x32 256S323A3U 점을 찍습니다
VFD Graphic Display module 256x32 dots 256S323A3U Features: Attractive and Readable Display: Vacuum Fluorescent Display Built-in CG-ROM: 6 Kinds of 8*16 Matrix Fonts: PC437, JIS (Katakana), PC850, PC860, PC863, PC865 1 Kinds of 16*16 Matrix Fonts: Shift-JIS (Japanese Characters Set ) +5VDC Single Power Source: PWM DC/DC converters generate VFD driving voltages for anodes, grids and filaments. Interface: RS-232, Baud-rate: 9600bps USB, transfer RS-232 to USB by using FTDI’s
-
높은 광도 VFD 그래픽 표시 96L08AA3 5Vdc 힘 넓은 시야각
VFD Graphic Display module 96x8 dots 96L08AA3 Features: Display: Readable Display Vacuum Fluorescent Display Since a DC/DC converter is used, only +5Vdc power source is required to use the module. Interface: 2-wired Synchronous Serial Interface (SDA, CLK for Signal Interfacing and /RST for Initialization) CG-ROM Font: 96 Characters of ASCII (5 * 7 Dot Matrix) CG-RAM Font (User Definable Font): 16 Kinds Available Brightness Level: 32 Levels (from 0% to 100%) Application:
-
각자 - 256S161A1가 빛난 그래픽 표시 단위에 의하여, VFD 전시 256x32 점을 찍습니다
VFD Graphic Display module 256x16 dots 256S161A1 Features: Simple connection to the host system. Either parallel or RS-232 serial interface can be selected. In case of RS-232 serial interface, it is possible to choose 9600, 19200, 28800 or 38400 bps. Since a DC/DC converter is used, only +5Vdc power source is required to operate the module. CG-ROM which is mounted on module offers PC437, PC850, KSC-5601 and GB-2312. Blue-green(505 nm) vacuum fluorescent display provides an
-
그래픽 표시 단위 160S321B1 8 조금 평행선 M68 LCD 호환성 공용영역이 160x32에 의하여 VFD 점을 찍습니다
Graphic Fluorescent Display(VFD) module 160S321B1 Features: 160×32 dot graphic. 8 bit parallel M68 LCD compatible & asynchronous serial interface (9600, 19200 bps). Since a DC/DC converter is used, only +5VDC power source is required to operate the module. CG-ROM which is mounted on module offers 6×8 dot and 11×16 dot font. 4 brightness levels can be selected by brightness control command. Chip in grass(CIG) driver VFD panel technology Application: Scales, ECR, POS, ATM,
-
다 색깔 다양성이 5Vdc 힘 VFD 그래픽 표시 단위에 의하여 140T163A1 140x16 점을 찍습니다
VFD Graphic Display module 140x16 dots 140T163A1 Features: Simple connection to the host system. Either parallel or RS-232 serial interface can be selected. In case of RS-232 serial interface, it is possible to choose 9600, 19200, 28800 or 38400 bps. Since a DC/DC converter is used, only +5Vdc power source is required to operate the module. CG-ROM which is mounted on module offers PC437, PC850, KSC-5601 and GB-2312. Blue-green(505 nm) vacuum fluorescent display provides an
-
160x32 점 큰 VFD 전시 160S321A1F 700 CD 발광성 긴 서비스 시간
Graphic Fluorescent Display(VFD) module 160S321A1F Features: Simple connection to the host system. Either parallel or RS-232 Serial interface can be selected. In case of RS-232 serial interface, it is possible to choose 9600, 19200, 28800 or 38400 bps. Pixel:160*32 Since a DC/DC converter is used. Only 5VDC power source is required to operate the module. CG-ROM which is mounted on module offers PC437, PC850, KSC-5601 and GB-2312. High quality blue-green (505nm) vacuum