"graphic display module"
96L08AA5 문자 표시 단위, 도표 VFD 전시 직렬 인터페이스가 96x8에 의하여 점을 찍습니다
VFD Graphic Display module 96x8 dots 96L08AA5 Features: Display: Vacuum Fluorescent Display (High Quality and Readable Display) Since a DC/DC converter is used, only +12Vdc power source is required to use the module. Interface: 2-wired Synchronous Serial Interface (SDA, CLK for Signal Interfacing and RST for Initialization) CG-ROM Font: 128 Characters of ASCII (5 * 7 Dot Matrix) CG-RAM Font (User Definable Font): 16 Kinds Available Brightness Level: 8 Levels (from 8% to 100%)
발광성 128S64AA2G가 조정가능한 VFD 전시 단위에 의하여, 진공 전시 128x64 점을 찍습니다
VFD Graphic Display module 128x64 dots 128S64AA2G Features: The input voltage for display is a single 5VDC. Compact and light-weight unit by using flat packed display drivers and one-chip VFD controller. Serial and 8-bit parallel interface available. Flash RAM for Font reserved for ASCII GB2312 KSC5601 and Shift JIS font table. Luminance adjustment available by software. Application: Measuring equipment display, test equipment display, instrument display Information boards in
20S401DA1 VFD 전시 단위, 도표 VFD 전시 5Vdc 힘 넓은 시야각
Dot matrix Vacuum Fluorescent Display(VFD) 20 characters 2 lines 20S401DA1 Features: Vacuum Fluorescent Display(VFD): self luminous, high quality and readable display 5*7 dot matrix, 20*4 characters 5VDC single power supply: built in DC/DC converter Both parallel and serial interface: baud-rate: 300 ~ 19,200 bps, parity selectable (non, even, odd) Two kinds of CG-ROM font: ASCII + Japanese and ASCII + European 4 Brightness level: 25%, 50%, 75% and 100% Application:
700 CD 광도 큰 Vfd 디스플레이 그래픽 256x32 점 256S323A3U
VFD Graphic Display module 256x32 dots 256S323A3U Features: Attractive and Readable Display: Vacuum Fluorescent Display Built-in CG-ROM: 6 Kinds of 8*16 Matrix Fonts: PC437, JIS (Katakana), PC850, PC860, PC863, PC865 1 Kinds of 16*16 Matrix Fonts: Shift-JIS (Japanese Characters Set ) +5VDC Single Power Source: PWM DC/DC converters generate VFD driving voltages for anodes, grids and filaments. Interface: RS-232, Baud-rate: 9600bps USB, transfer RS-232 to USB by using FTDI’s
측정 장치를 위해 빛난 256x32 점 USB VFD 전시 256S323A3U 각자 -
USB VFD Graphic Display module 256x32 dots 256S323A3U Features: Attractive and Readable Display: Vacuum Fluorescent Display Built-in CG-ROM: 6 Kinds of 8*16 Matrix Fonts: PC437, JIS (Katakana), PC850, PC860, PC863, PC865 1 Kinds of 16*16 Matrix Fonts: Shift-JIS (Japanese Characters Set ) +5VDC Single Power Source: PWM DC/DC converters generate VFD driving voltages for anodes, grids and filaments. Interface: RS-232, Baud-rate: 9600bps USB, transfer RS-232 to USB by using FTDI
